cDiver.net
The Commercial Diver Network
Hull cleaning machine.
Hi, Divers.
Someone recommend hull cleaning machine which has good reputation.
Thanks.
Views: 1161
Replies to This Discussion
-
Permalink Reply by KYU SIK LEE on
-
Hi,
I am in South Korea.
Our currently asked vessel is 250,000gt.
Thanks.
-
-
Hi, view umc.co.uk for mini pamper cleaning cart.
Feel free to contact me and I will forward your enquiry to our sales rep.
Tom
-
Permalink Reply by A.. Parnell on
-
Has anyone ran into Mark Rogers of Sea Vac International cleaning systems?.
-
-
Thanks.
I have contacted UMC.
Very thanks again.
-
Permalink Reply by Barone on
-
you can also call HYDREX they have a few styles of hull cleaners one you can ride and clean and one you can drive like an ROV
-
Permalink Reply by Russell W Smith on
-
Any diver right out of shool
-
Permalink Reply by steve henshaw on
-
umc mini pamper.
also umc are very helpful or have been with me over the years
-
Permalink Reply by George Patterson on
-
the only hull cleaning equipment i ever used came from the local hardware the mk I spade was the weapon of choice
-
Permalink Reply by Fred C. Johnson on
-
Try this one on for size for hull cleaning.
100 grain primer cord ,weaved into a net ( like a cargo net ) strung under the ships hull, fore and aft and spaced 12 inchs off the hull plate with X type plastic spacers.
BANG - hull 100% clean.
Ships valves and hull plate must be in good condition for obvious reasons.
Old tramp steamer would go straight to the bottom, brite side now ya got a salvage job.
-
-
It helps if you shave the back of your legs behind your knee caps and use vaseloine, also put vasoline lube around your arm pit area that gets chafed.
© 2024 Created by Adam Broetje.
Powered by
