cDiver.net
The Commercial Diver Network
hat inspections
Replies to This Discussion
-
Permalink Reply by Mark Sparks on
-
I pay about $400 a pop. They need to be certified and that is how you cna make sure they are not goin to screw you. I use the same guy at a local dive shop. or you could take the course and do it yourself. It's a weekend course I think. Then you can be the one making the money.
-
Permalink Reply by steve henshaw on
-
help guys.
i am servicing my kmb 18band mask, i have decided to go with a wet connector this time around,for all the right reasons but i cannot find anything showing how the wires are placed in the old style choc block.
help any one
steve h
-
Permalink Reply by thomas edwards on
-
it is on the kirby morgan web site
-
-
well i could not find it.
but i have sorted now (yippy)
with new comms line it has never sounded so good
steve h
-
Permalink Reply by Brendan Kearns on
-
Mark Sparks said:I pay about $400 a pop. They need to be certified and that is how you cna make sure they are not goin to screw you. I use the same guy at a local dive shop. or you could take the course and do it yourself. It's a weekend course I think. Then you can be the one making the money.
-
-
Get a group together and attend Singapore's KB Associates for a maintenance course that is certified by DSI Kirby Morgan. They have the full range of hats including the very lates KM77.
-
Permalink Reply by Dan Dolson on
-
How much is the course that you are talking about?
Brendan Kearns said:Get a group together and attend Singapore's KB Associates for a maintenance course that is certified by DSI Kirby Morgan. They have the full range of hats including the very lates KM77.
-
Permalink Reply by Martin Morris on
-
Average costs for yearly inspections of the HeavyMetalDivers "Gladiator" seem to run around $145.
© 2024 Created by Adam Broetje.
Powered by
