James Leach's Discussions (76)

Discussions Replied To (72) Replies Latest Activity

"A few years ago some poor soul got sucked into a 4" pipe. As the story goes their wa…"

James Leach replied Dec 24, 2009 to Delta P Demonstration

22 May 14, 2010
Reply by Martin Morris

"Your IMCA cert. is just fine, most big companies are IMCA. The problem will be with…"

James Leach replied Dec 22, 2009 to Conversion of IMCA to ADC

7 Dec 22, 2009
Reply by Mike Wolfe

"Refer to your USN dive manual. "optimum over bottom pressure is 165 psi" so at 250fs…"

James Leach replied Dec 20, 2009 to Buying a New Hat

33 Dec 20, 2009
Reply by Matthew

"Some companies do not allow knives on deck, but will permit them in the water. A goo…"

James Leach replied Dec 19, 2009 to Buying a New Hat

33 Dec 20, 2009
Reply by Matthew

"When I went to work for big salvage company, they're policy was you can use your own…"

James Leach replied Dec 19, 2009 to Buying a New Hat

33 Dec 20, 2009
Reply by Matthew

"The Gorski free flows at higher pressures."

James Leach replied Dec 19, 2009 to Buying a New Hat

33 Dec 20, 2009
Reply by Matthew

"Don't go more than 2k for a 17. You'll have to put a lot into getting it rebuilt. So…"

James Leach replied Dec 18, 2009 to Buying a New Hat

33 Dec 20, 2009
Reply by Matthew

"Getting your gear together ASAP is a good move. It tells everyone around you that yo…"

James Leach replied Dec 18, 2009 to Buying a New Hat

33 Dec 20, 2009
Reply by Matthew

"Isn't this question mute?! No body is hiring right now. Unless this kid has a promis…"

James Leach replied Dec 1, 2009 to what will i need offshore?

15 Dec 4, 2009
Reply by Blake Cunningham

"Some little things can add up in a big way. Any mechanical, welding, or health/safet…"

James Leach replied Nov 15, 2009 to What do dive companies look at in a new diver/tender in the hiring process?

8 Dec 6, 2009
Reply by Mike Wood

RSS

NEW Commercial Diving Jobs

© 2024   Created by Adam Broetje.   Powered by

Badges  |  Report an Issue  |  Terms of Service