The Commercial Diver Network
Hey there, I think some of you would be of great advice on this. What would be by your opinion the best underwater drill to work with, and the mesh also.
The application for this: horizontal h*** around 9" deep by 1 1/8" diameter. We would have over 300 h***s to do and we are in the market to get the best mesh and the best drill for the diver, you know light but which can do the job quick. We currently have a CP14 which is supposetly a good one, DBB9 (made by Sullair I think) was our favorite but they no longer make them.
If any of you have store name to shoot, you can shot it out we will be glad to look at it(mesh and drill).
Thanks everyone and best day to all
Go to www.csunitec.com
both air and hydrualic core drills. I recommend the hydrualic as its motor is 1/2 the size of air motor.
also for 1 1/8" dia. h*** you will want to use rig-mounted drill stand. These are very productive drills and time is money.
Also even though it is underwater you must pump water to the core drill to flush cuttings from the bit and h***.
Possable you could rent a hydrualic core drill for the job.