prop bag

I need recommendations on a low cost prop bag to install 32" and bigger props.  Please state the type of bag and the manufacturer and website please. I assume a bag that can handle 350 lbs is sufficient. 

I recently performed two prop jobs that were on bigger props 32" and 38" without a bag and it was not easy getting them back on shafts.

 

Thanks

Sean

Views: 317

▶ Reply to This

Replies to This Discussion

Permalink Reply by Otter Green on May 18, 2013 at 11:01pm

Good luck getting bag that will have clearance under the hull. Lashing the wheel with 2 lines and having someone topside haul in will bring it RIGHT back to where it needs to be. 

Permalink Reply by A.. Parnell on May 19, 2013 at 12:21am

Sean contact the Carter Bag Company,Enmclaw, Wa.

  

Permalink Reply by sean blesi on May 19, 2013 at 7:54pm

Ok Thanks Ace

Hope you are well!

Permalink Reply by A.. Parnell on May 19, 2013 at 8:33pm

Very well thank you

Permalink Reply by sean blesi on May 19, 2013 at 7:56pm

Thank you Otter.  I figured that would be a problem.  Last job had very clearance between rudders and shafts.

Permalink Reply by Billy Cox on May 23, 2013 at 6:41pm

Carter prop bags.  They work great as long as you get the rigging right, and have good topside support.

Permalink Reply by sean blesi on May 27, 2013 at 9:18pm

Thanks for the reply Billy.  I try to limit the labor help to maximize profit on each job.  Each job is done with 2 people or myself.

RSS

NEW Commercial Diving Jobs

© 2024   Created by Adam Broetje.   Powered by

Badges  |  Report an Issue  |  Terms of Service