cDiver.net
The Commercial Diver Network
Adjustable Pressure regulators
I am looking to build a costom air control panel so I may use it with some high pressure cylenders so I dont have to lug my compressor around. I am lookin for some in put on the different types of regulators on the market. I have been used tescom regulators but they are getin a bit expensive. Any advice. I have seen some other ones out there but dont know about preformance or manufacture.
Views: 1
Replies to This Discussion
-
Permalink Reply by Fred C. Johnson on
-
Use a BROCO High Flow regulator with compressed air bottle connector or hard pipe into control panel.
Back in the day prior to use of Tescom regulators both air and mixed gas control boxs used high flow volume oxygen regulators.
-
Permalink Reply by liz vazz on -
I used a bank system with the same broco high flow , used both hard pipe and compressed air bottle connectors to make small adjustments . We set it up in a small trailer to haul around . Backed right up to compressor for easy refill , it had about 5 k bottles . I loved it.
-
Permalink Reply by Martin Morris on
-
Swagelok also makes a reg very simular to TESCOM but less expensive.
NEW Commercial Diving Jobs
© 2012 Created by Adam Broetje.
